Fallkniven knife F1 "Pilot Survival", zytel

F1 is the official survival knife for Swedish Air Force pilots since 1995 and sets a new world standard! The company went to the F1 Pilot Survival Knife for 8 long years, constantly experimenting with geometry and materials, trying to give the knife the most versatile shape. As a result, the F1 knife has been the official survival knife of the Swedish Royal Air Force since 1995. The knife became an integral part of the equipment of the JAS 39 Gripen fighter, included in the NAZ (wearable emergency stock) set of every fighter pilot of the Swedish Air Force. 14 years in the army is a recommendation that is quite worthy, if not respect, then at least attention.

Important factors such as technical design, ergonomics and economy are combined in the F1.

The knife meets and far exceeds established international standards for strength, personal safety and value for money.

The Fallkniven F1 introduces a completely new philosophy of survival knives. At the same time, it combines years of experience in knife manufacturing with modern technology.

Convenient size, well thought out design, incredibly tough laminated steel are just a few of the many details that make this knife one you can really rely on.

The knife comes with two types of scabbard - Zytel or leather. The full leather case is made of black high quality leather. The Zytel die-cast scabbard is neat and safe, combining qualities that should be very attractive to any user.

Fällkniven AB's knife came out small. In fact, the size of the F1 rivals any mid-sized folding knife. The F1 weight is also consistent with the usual EDC norm. However, with a medium size, the F1 has a full-size handle, an almost ten centimeter blade with an impressive butt thickness. And most importantly - the massive knife shank runs through the entire handle. At the end of the handle of each knife there is a hole for a lanyard with a diameter of 5 mm, which allows you to thread even a rather thick cord. In the version with a handle made of Thermorun rubber, the shank also protrudes from the handle by a few millimeters, which allows you to strike at the end of the knife without fear of damaging the rubber coating. The thermorun rubber itself, according to information from the manufacturer, was specially created for use in the difficult conditions of the north and withstands large temperature drops. From which it follows that F1 can be safely operated in any climatic and natural conditions.

Blades for F1 are made in the famous Japanese knife center - Seki (Japan). A special feature is that the blades for Fällkniven AB are made at a factory owned by the Hattori family - Japanese gunsmiths and blacksmiths who have won recognition in the world of knives since the Middle Ages.

In addition to materials, it will not be superfluous to pay attention to the structure of the blade and the shape of its cutting edge (RK). Lenticular sharpening (LZ) significantly differs from the traditional factory sharpening of almost all serial knives produced today. The blades of the absolute majority of serial knives have pronounced slopes of various shapes and their RK is displayed in the shape of the letter "V". LZ differs in the geometry of the blade and in its shape ensures the achievement of high cutting efficiency, at the same time guaranteeing a large margin of safety for the RK. By the way, it is worth noting that the best Japanese katanas have a similar cross-sectional shape, because when cutting, the blade with LZ meets the least material resistance compared to knitting wedge-shaped and concave sharpenings. Also, the presence of LZ increases the efficiency of working with hard materials (large bones when cutting game, when working on wood, etc.).

The powerful blade is made of durable laminated Japanese VG10 steel and can withstand the stress of hard use.

Lam. VG-10 is a technologically advanced three-layer bag from Japan, the center layer of which is made directly from solid VG-10 steel, and the covers are made from softer 420J2 mild steel. This structure increases the elasticity of the blade under lateral loads.

VG-10 is a Japanese corrosion-resistant steel developed by Takefu Special Steel Co., Ltd. (Japan) for cutting tools. This steel is also known as V-Gold # 10.

VG-10 has an optimal hardness (59 HRC), and softer laminating layers provide corrosion resistance and overall blade strength. One of the distinguishing features of the steel grade

VG-10 is used in cobalt alloy. Cobalt is an expensive and rare alloying additive in steels; due to its presence, steel acquires increased hardness and toughness.

420J2 - Japanese low carbon stainless steel; mild stainless steel of grade 420, improved by Japanese metallurgists. It is quite strong and very resistant to corrosion.

The Japanese prefer not to export their VG-10 steel and are comprehensively promoting the relocation of production to their country. As a result, blades from this steel for Fällkniven AB are produced in Japan in Seki, the famous knife center of the country. A special feature is that they are made at a factory owned by the Hattori family - Japanese gunsmiths and blacksmiths who have won recognition in the world of knives since the Middle Ages.

VG-10 steel composition: carbon (1%), chromium (15%), silicon (0.6%), manganese (0.5%), phosphorus (0.03%), molybdenum (1.05%), cobalt (1.4%), vanadium (0.2%). Composition of 420J2 steel: carbon (0.32%), chromium (15%), manganese (1%), silicon (1%).

Thus, we believe that F1 fits perfectly into the concept of an urban non-folding knife, being a reliable and high-quality tool, with its own history and image of a small and strong knife for all occasions. Yes, there is nothing perfect in the world, just as there is no perfect knife. But this knife from Sweden may well provide its owner with many tasks in a modern city and beyond. This knife can be recommended, first of all, for lovers of an active lifestyle, who do not want to be limited by standard frames. Those who value time-tested quality.

Characteristics

Manufacturer: Fallkniven

Country of origin: Japan

Overall length, mm: 210 mm

Blade thickness, mm: 4.5

Blade hardness, HRC: 59

Sharpening Type: Plain

Knife weight: 150g

Scabbard Material: Zytel

Cutting edge: Smooth

Handle material: Thermorun

Knife type: Fixed blade

Blade length, mm: 97

Steel grade: Lam.VG10